Clamping ring screw connection
Compression fitting
COMPFITT-DN25-G11/4INX28
Register now and access more than 125,000 products
Datasheets(X)
 | |
Material | Brass, suitable for drinking water |
Connection thread | ET G 11/4 inch |
Clamp ring diameter | 28 mm |
DN nominal width | DN 25 |
Width across flats (SW) | 46 mm |
Width across flats 2 | 39 mm |
Length (L) | 49 mm |
Min. contact surface of gasket | 3.5 mm |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Max Longlife & Speed point chisel
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Jacket Planam Highline
C 8.0 TX bit (5/16 inch) C 8.0 (5/16 inch)
Cutting disc Klingspor A 46 TZ Special
System drawer cabinet 12.6: 805x603 mm
Angle grinder EWS 7-115 Basic
Stretch X pilot jacket