Clamping sleeve PRINETO®
PRINETO sliding sleeve for HD pipe
FITT-PRINETO-SLIDINGSLEEVE-F(HD PIP)-D20
Register now and access more than 125,000 products
- Compression fittings are created with an axial sliding sleeve
- During the connection, the slider, which can be moved lengthwise, clamps the PE-X pipe against the damaged profile of the screw connection and creates an inseparable connection
The slider can be mounted on both sides of the pipe (two-way slider)
Install the slider on the pipe before extending the pipe ends
Datasheets(X)
For sizes 40 to 63, we recommend using silicone grease to make it easier to slide the slider over the pipe
 | |
Length (i) | 18 mm |
Product weight (per item) | 22 g |
Surface | Nickel plated |
Material | Brass |
Last viewed
Check valve Euro Universal
Low-cut safety shoe S3
Multi-use bimetal bandsaw blade One blade for any job
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Work coat
Screw fitting elbow angle 90°, metal thread, metric, PA6 MOP BS SGA
Slotted flat-head screws with large head DIN 921, A1 stainless steel, plain
Akura 44 profile thumbturn cylinder
Mud flaps
K insulation pipe clamp With permanently integrated damping insert