Clamping sleeve PRINETO®
PRINETO sliding sleeve for PE-X pipe
FITT-PRINETO-SLIDINGSLEEVE-F.(PE-X)-D20
Register now and access more than 125,000 products
- Compression fittings are created with an axial sliding sleeve
- During the connection, the slider, which can be moved lengthwise, clamps the PE-X pipe against the damaged profile of the screw connection and creates an inseparable connection
The slider can be mounted on both sides of the pipe (two-way slider)
Install the slider on the pipe before extending the pipe ends
Datasheets(X)
 | |
Length (i) | 18 mm |
Product weight (per item) | 19 g |
Surface | Plain |
Material | Brass |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Slotted set screw with truncated cone DIN 551, A4 stainless steel, plain
Hexagonal bolt, fully threaded, SB FITTINGS DIN EN 15048-1
Blind rivet, flat head
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Engine timing tool set, 8 pieces
Corner connector screw with countersunk head, head recess Steel, zinc-plated, blue passivated
Divider assortment With system boxes for system dimensions 16.8
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Ball joint pin ejector