Welcome to Würth Aerospace Solutions For trade customers only

Clear lacquer 2C HS Reflow

2C HS clear lacquer Reflow
CLRLAC-2C-REFLOW-5LTR

Art.-no. 5866201105
EAN 4047376455078

Prices for customers after login
Clear lacquer 2C HS Reflow

Art.-no. 5866201105

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

High-solid acrylic clear varnish with increased resistance to scratches for complete and partial painting of passenger cars and commercial vehicles. Special varnish based on reflow technology.
  • Resistant to micro-scratches/car wash facilities

  • Varnish flows together at micro-scratches due to UV radiation and heat

  • Brilliant clear varnished condition, optimum application

  • Ideal for painting over solvent and water-based paints

  • Maximum permissible VOC content: 840 g/l of product category 2 (e) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV). Max. VOC content: 565 g/l

  • Solids content of base material in %: 49.2
Notice

Protect from frost. The substrate must have the correct pre-treatment depending on the substrate. In certain cases, using a suitable pre-cleaner or a pre-coat is recommended.


Maximum permissible VOC content: 840g/l of product category 2 (e) German Ordinance on Solvent-Based Paints and Lacquers (ChemVOCFarbV) Max. VOC content: 565 g/l

Application area
Application method
Pressure [bar]Nozzle [mm]Spray passesThinner
Air/flow cup3.5-41.3-1.41-210-15 %
HVPL21.3-1.41-210-15 %
Brush on/roll on----
Airless----

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

Due to its resistance to micro-scratches (e.g. produced by car washes) and chemicals, the 2-component HS reflow clear lacquer is particularly well suited for high-quality complete and partial painting of passenger cars, motorcycles and commercial vehicles.

Instructions

Mixture by weight: 2:1 with 2-component HS hardener for top coats and acrylic thinner


Thinning adjustment 10-15 vol. % depending on coat thickness

Contents

5 l

Chemical basis

Two-component acrylic

Smell/fragrance

Characteristic

Colour

Colourless

Viscosity/consistency

Liquid

Drying time

30 min

Conditions for drying time

at 20°C

Gloss level

High gloss

Density

0.995 g/cm³

Max. temperature resistance

120 °C

Density conditions

at 20°C

Application conditions

at 10°C and 75% relative humidity

VOC concentration (CH)

505.5 g/l

Shelf life from production

36 Month

Min. proportion of solids

48.5 %

Max. proportion of solids

50.5 %

Max. yield (area)

8 m²

Min. yield (area)

6 m²

Drying
Dust-dryTouch-dryAssembly-readyCan be painted over
Object temperature 20°C25-30 minutes6-8 hours24 hours
Object temperature 60°C5 min30 min1 hour
Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 1
Nitrile chemical protective glove Long, heavy-duty design
Nitrile chemical protective glove Long, heavy-duty design
Description:
Permeation level: 1
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information