Clear lacquer 2C HS Reflow - CLRLAC-2C-REFLOW-5LTR

Clear lacquer 2C HS Reflow - CLRLAC-2C-REFLOW-5LTR - 1

Clear lacquer 2C HS Reflow

Name: Clear lacquer 2C HS Reflow
Brand: Würth
SKU: 5866201105

2C HS clear lacquer Reflow
CLRLAC-2C-REFLOW-5LTR

Art.-no. 5866201105

EAN 4047376455078

All versions

Similar products

Prices for customers after login

Clear lacquer 2C HS Reflow

Art.-no. 5866201105

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

High-solid acrylic clear varnish with increased resistance to scratches for complete and partial painting of passenger cars and commercial vehicles. Special varnish based on reflow technology.

Resistant to micro-scratches/car wash facilities

Varnish flows together at micro-scratches due to UV radiation and heat

Brilliant clear varnished condition, optimum application

Ideal for painting over solvent and water-based paints

Maximum permissible VOC content: 840 g/l of product category 2 (e) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV). Max. VOC content: 565 g/l

Solids content of base material in %: 49.2

Notice

Protect from frost. The substrate must have the correct pre-treatment depending on the substrate. In certain cases, using a suitable pre-cleaner or a pre-coat is recommended.

Maximum permissible VOC content: 840g/l of product category 2 (e) German Ordinance on Solvent-Based Paints and Lacquers (ChemVOCFarbV) Max. VOC content: 565 g/l

Application area

Application method
	Pressure [bar]	Nozzle [mm]	Spray passes	Thinner
Air/flow cup	3.5-4	1.3-1.4	1-2	10-15 %
HVPL	2	1.3-1.4	1-2	10-15 %
Brush on/roll on	-	-	-	-
Airless	-	-	-	-

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Due to its resistance to micro-scratches (e.g. produced by car washes) and chemicals, the 2-component HS reflow clear lacquer is particularly well suited for high-quality complete and partial painting of passenger cars, motorcycles and commercial vehicles.

Instructions

Mixture by weight: 2:1 with 2-component HS hardener for top coats and acrylic thinner

Thinning adjustment 10-15 vol. % depending on coat thickness

Contents	5 l
Chemical basis	Two-component acrylic
Smell/fragrance	Characteristic
Colour	Colourless
Viscosity/consistency	Liquid
Drying time	30 min
Conditions for drying time	at 20°C
Gloss level	High gloss
Density	0.995 g/cm³
Max. temperature resistance	120 °C
Density conditions	at 20°C
Application conditions	at 10°C and 75% relative humidity
VOC concentration (CH)	505.5 g/l
Shelf life from production	36 Month
Min. proportion of solids	48.5 %
Max. proportion of solids	50.5 %
Max. yield (area)	8 m²
Min. yield (area)	6 m²

Drying
	Dust-dry	Touch-dry	Assembly-ready	Can be painted over
Object temperature 20°C	25-30 minutes	6-8 hours	24 hours
Object temperature 60°C	5 min	30 min	1 hour