Clear varnish - CLRLACSPR-HIGHGLOSS-400ML

Clear varnish

Name: Clear varnish
Brand: Würth
SKU: 08931881

Clear lacquer
CLRLACSPR-HIGHGLOSS-400ML

Art.-no. 08931881

EAN 4011231894319

All versions

Similar products

Prices for customers after login

Clear varnish

Art.-no. 08931881

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

The varnish dries in an extremely short time

Allows you to overcoat untreated wood surfaces

The clear lacquer is compatible with all AC and NC paints

Notice

Not suitable for synthetic resin varnish.

The two clear varnishes are not suitable for synthetic resin lacquers. Upturn the can after use and spray until the valve is empty.

An adhesion promoter must be used first on varnishable plastics. On account of the large number of plastics, we recommend conducting a spray test beforehand.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Colourless protective varnish for painting over untreated wood surfaces.

Recommended for touch up work and varnishing components. Solvent or water-based varnishes and sanded old varnishes are suitable surfaces.

Instructions

Shake the can vigorously (at least 2 minutes) from the point at which the mixing ball is audible, briefly spray into the air to blow residual particles out of the riser tube and the spraying head; then conduct a spray test. When coating entire surfaces for the first time, spray the surface evenly with a back-and-forth motion while maintaining a distance of 20-30 cm. Upturn the can after use and spray until the valve is empty.

Chemical basis	Nitroalkydale
Contents	400 ml
Smell/fragrance	Characteristic
Colour	Transparent, high gloss
Gloss level	High gloss
Min./max. spraying distance	20-30 cm
Shelf life from production	24 Month
Ignition temperature	365 °C

Additive article:

Product

Description

Quantity

Price
/PU

Hook-and-loop hand sanding block

SNDBLOCK-HAND-70X120MM

Art.-no. 058770 120

The moulded back of the block fits perfectly into the palm of the hand.

x 1 pcs

Spraymaster spray can attachment

ATTCH-SPRCAN-F.PNTSPR-SPRAYMASTER

Art.-no. 0891090

The practical attachment for your spray cans

x 1 pcs

Sealing primer

CLRLACSPR-PENETRATINGPRIMER-CLEAR-400ML

Art.-no. 089318

Colourless priming of natural wood surfaces for removing unevenness and raising wood fibres for sanding in between coats.

Dust binder cloth

DSTCLTH-80X50CM

Art.-no. 0899700001

For binding even the finest dust before painting work.

x 5 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Chemical protective glove made from natural latex and chloroprene

Description:

Permeation level: 1

Cotton flocking on the inside

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.