Closed-end blind rivet, dome head ISO 15975 dome head aluminium/aluminium
ISO 15975 flat head aluminium/aluminium
RIV-ISO15975-ALU/ALU-(0,5-2,0)-3,2X8,0
Register now and access more than 125,000 products
"ISO-standardised" closed-end blind rivet
The dimensions and tolerances defined in EN ISO 15975 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 3.2 x 8 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. grip range | 0.5-2.0 mm |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
RoHS-compliant | Yes |
ISO | 15975 |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 460 N |
Tensile fracture load | 540 N |
Head type | Dome head |
Last viewed
Nature trousers
Safety boots, S3
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Feather key, high shape DIN 6885, steel, plain, shape B
Tray
Low-cut safety shoes, S3
Low-cut safety shoes, S1
Rivet nut with countersunk head and knurled shank
Raised countersunk head tapping screw, C shape H recessed head
Floor panel