Closed-end blind rivet, dome head ISO 15975 dome head aluminium/aluminium
ISO 15975 flat head aluminium/aluminium
RIV-ISO15975-ALU/ALU-(5,0-8,0)-4,0X12,5
Register now and access more than 125,000 products
"ISO-standardised" closed-end blind rivet
The dimensions and tolerances defined in EN ISO 15975 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 4 x 12.5 mm |
Head diameter (dk) | 8.4 mm |
Head height (k1) | 1.7 mm |
Min./max. grip range | 5.0-8.0 mm |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
RoHS-compliant | Yes |
ISO | 15975 |
Drill hole diameter | 4.1 mm |
Shear-fracture load | 720 N |
Tensile fracture load | 760 N |
Head type | Dome head |
Last viewed
Concealed screw assortment 228 pieces in system case 4.4.1.
Double cylinder S5 locking system
Flat washer — large series ISO 7093-1 steel 300 HV, zinc flake silver (ZFSH)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Slotted flat-head screw DIN 85, polyamide 6.6 natural
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Safety boots, S3
Wad punch For round eyelets
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3002
PVC single core H05/H07V-K, fine wire