Closed-end blind rivet, dome head ISO 15975 dome head aluminium/aluminium
ISO 15975 flat head aluminium/aluminium
RIV-ISO15975-ALU/ALU-(6,5-8,0)-4,8X12,5
Register now and access more than 125,000 products
"ISO-standardised" closed-end blind rivet
The dimensions and tolerances defined in EN ISO 15975 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 4.8 x 12.5 mm |
Head diameter (dk) | 10.1 mm |
Head height (k1) | 2 mm |
Min./max. grip range | 6.5-8.0 mm |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
RoHS-compliant | Yes |
ISO | 15975 |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 1000 N |
Tensile fracture load | 1400 N |
Head type | Dome head |
Last viewed
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagon Socket Head Cap Screw
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Soldering fluid no. 41
Torque wrench with 1/4 inch reversible ratchet Stahlwille MANOSKOP® 755R/1
Hexagonal bolt with shank
Leakage detection forming gas starter set
Work jacket Peter fleece jacket
CLIP-O-FLEX® holder Counterflex Metre counter and handle