Closed-end blind rivet, dome head ISO 15975 dome head aluminium/aluminium
ISO 15975 flat head aluminium/aluminium
RIV-ISO15975-ALU/ALU-(8,0-9,5)-4,8X14,5
Register now and access more than 125,000 products
"ISO-standardised" closed-end blind rivet
The dimensions and tolerances defined in EN ISO 15975 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 4.8 x 14.5 mm |
Head diameter (dk) | 10.1 mm |
Head height (k1) | 2 mm |
Min./max. grip range | 8.0-9.5 mm |
Material of sleeve | Aluminium |
Material of mandrel | Aluminium |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
RoHS-compliant | Yes |
ISO | 15975 |
Drill hole diameter | 4.9 mm |
Shear-fracture load | 1000 N |
Tensile fracture load | 1400 N |
Head type | Dome head |
Last viewed
Bandsaw blade stainless steel individual
Hexalobular-type cheese head screw ISO 14579, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon nut, low profile with fine thread ISO 8675, steel 5, plain
ZD 32 door handle, escutcheon fitting
Cupboard rail support, oval
Knife blade Martor trapezoidal blade no. 5232
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with o-ring
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
WÜPOFAST® black oxide chipboard screw Steel, browned, full thread, countersunk head, PZ
Twist drill bit HSCo DIN 338 MFD Speed