Closed-end blind rivet, dome head ISO 15976 dome head steel/steel
ISO 15976 flat head steel/steel
RIV-ISO15976-ST/ST-(1,5-3,0)-3,2X8,0
Register now and access more than 125,000 products
The dimensions and tolerances defined in EN ISO 15976 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 3.2 x 8 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. grip range | 1.5-3.0 mm |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
RoHS-compliant | Yes |
ISO | 15976 |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1150 N |
Tensile fracture load | 1300 N |
Head type | Dome head |
Last viewed
Identification rings, PVC
RR02 tubular frame mortise lock
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, zinc-plated, blue passivated (A2K)
Corner connector screw with countersunk head
FLEXEN® PE
Ear plugs x-200
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, zinc-plated
PRINETO connection assembly for heat flow meter
Work trousers
Hoodie with zip Organic cotton W280