Closed-end blind rivet, dome head ISO 15976 dome head steel/steel
ISO 15976 flat head steel/steel
RIV-ISO15976-ST/ST-(5,0-6,5)-3,2X12,0
Register now and access more than 125,000 products
The dimensions and tolerances defined in EN ISO 15976 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (Ø d1 x l1) | 3.2 x 12 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. grip range | 5.0-6.5 mm |
Material of sleeve | Steel |
Material of mandrel | Steel |
Surface of the sleeve | Zinc plated |
Surface of the mandrel | Zinc plated |
RoHS-compliant | Yes |
ISO | 15976 |
Drill hole diameter | 3.3 mm |
Shear-fracture load | 1150 N |
Tensile fracture load | 1300 N |
Head type | Dome head |
Last viewed
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Fitter's tool box Junior I 60 pieces
SC long twist drill bit DIN 338
Hexagon Socket Head Cap Screw
Plug-in corner rack
Dynamic hoodie
Glow plug tool set 1.3 Multijet engines, M8x1 Opel/Vauxhall, Ford, FCA Group 11 pieces
Safety goggles Spica®
Multi-standard dungarees
Cut protection glove Uvex phynomic C XG protexxion zone