Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204 - WOCLDGLU-D2-12KG

Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204

Name: Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204
Brand: Würth
SKU: 0892100

Cold wood glue, D2
WOCLDGLU-D2-12KG

Art.-no. 0892100

EAN 4011231895866

All versions

Similar products

Prices for customers after login

Cold wood glue D2 Complies with stress group D2 in accordance with DIN EN 204

Art.-no. 0892100

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

For gluing all types of wood

For universal use

Ready-to-use D2 cold wood glue. For construction of interior doors and staircases and for assembly, surface, board-joint and block gluing.

Easy to pour

Glue can be poured cleanly and easily into the glue bottle or glue roller by attaching the tap to the glue bucket.

High level of gluing quality

Good adhesion. Hardened glued joints are viscoplastic.

Transparent when hardened

No visible adhesive joints

Notice

In conjunction with the tannic acid in the wood, the impact of bare metal may result in blue discolouration, especially with oak, and in red discolouration with beech. At a pressing temperature above +50 °C, brown discolouration may occur in soft woods. Fresh splashes of glue can be removed with water. Older glue residues can be softened with nitro thinner or acetone and then rubbed off. Stir the contents thoroughly before application and always close the container tightly after use. The processing time and the setting time are heavily influenced by the working conditions, e.g. the temperatures, moisture and absorption levels of the materials, application quantities and tensions in the material. Protect from frost.

Application area

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Universally applicable, ready-to-use D2 cold wood glue. For construction of interior doors, interior staircases and assembly, surface, board-joint and block gluing, stationary edge coating with veneers and solid wood strips, soft wood, hard wood and exotic woods (after testing beforehand) and chipboard. Indoor areas with occasional brief exposure to draining water or condensation water.

Instructions

Apply a thin, even layer of D2 cold wood glue on one side using a glue roller, glue trowel, glue brush or an application tool. For more information, please refer to the technical data sheet.

Colour	White
Chemical basis	Polyvinyl acetate dispersion
Container	Bucket
Weight of content	12 kg
pH value	5
Min. proportion of solids	50 %
Min. film forming temperature	6 °C
Min./max. open time /conditions	6-7 min / at 20°C and 150 g/m²
Max. temperature resistance of the hardened material	80 °C
Min. room temperature, material temperature and glue temperature	18 °C
Min./max. relative air humidity	60-70 %
Min./max. pressing pressure	0.1-0.8 N/mm²
Min./max. wood moisture	8-10 %
Min./max. application quantity in assembly bonding	120-180 g/m²
Min./max. application quantity in surface bonding	100-160 g/m²
Shelf life from production/conditions	12 Month / cool and dry storage area

Minimum pressing times*
For assembly gluing	At 20°C	8-15 min.
For board and block gluing	At 20°C	From 20 minutes
For surface gluing	At 20°C	30-40 min.
	At 50°C	5-10 min.
	At 80°C	1-8 min.
For veneer gluing	At 20°C	15-20 min.
	At 50°C	5-10 min.
	At 80°C	1-5 min.
* The minimum pressing times are for the application conditions specified above. Deviations in the processing conditions may decrease or increase the pressing time.

Additive article:

Product

Description

Quantity

Price
/PU

Glue spatula

GLUSPTLA-ABS-COGGING-4MM

Art.-no. 0891185

For applying all common surface and assembly glues to all wood types

x 3 pcs

Glue roller With polyurethane roller

GLUROLL-(FILLVOLUME-1KG)

Art.-no. 0891186

For the rapid and even application of glue during edge and surface gluing.

x 1 pcs

Polyurethane roller With ribbed, non-porous surface

ROLL-F.GLUROLL-PUR

Art.-no. 0891187

Enables even application of glue

x 1 pcs

Foam roller With porous, rough surface

ROLL-F.GLUROLL-FM

Art.-no. 0891188

Enables thick application of glue

x 1 pcs

Inner plastic roller With ribbed, non-porous surface

ROLL-F.GLUROLL-PLA-IN

Art.-no. 0891189

For edge gluing

x 1 pcs

Glue dispenser unit For glue application

DSP-GLU-EMPTY-500ML

Art.-no. 08921000

x 1 pcs

Economy glue container For glue application

GLUCONT-EMPTY-1500G

Art.-no. 089210001

x 1 pcs

Assembly adhesive

ASMBYADH-CART-310ML

Art.-no. 0892100100

Assembly adhesive for fast and high-strength adhesive bonding for indoor and outdoor applications

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Household glove

Description:

Permeation level: 6

Liquid-proof, premium-quality cleaning glove made from natural latex

Vinyl chemical and moisture protective glove

Description:

Permeation level: 6

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove made from chloroprene and latex

Description:

Permeation level: 6

Cotton flocking on the inside

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Nitrile chemical protective glove Long, heavy-duty design

Description:

Permeation level: 6

Chemical protective glove made from natural latex and chloroprene

Description:

Permeation level: 6

Cotton flocking on the inside

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.