Collated formwork nail SMA 116/10
Formwork nail collated SMA 116/10
NL-FORMWRK-MG-(SMA116/10)-72MM
Register now and access more than 125,000 products
- 10 nails per magazine
- With pre-determined breaking point
- For pin driver with magazine
- Observe processing instructions
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
 | |
Material | Steel |
Surface | Zinc plated |
Shaft length (LS) | 72 mm |
Shank diameter (ØdS) | 3.7 mm |
Length of magazine (LG) | 93 mm |
Number of nails | 10 |
Suitable for paling-board thickness (Ld) | 47 mm |
Suitable for device type | Würth BST MA-75, Hilti DX 350, Hilti DX 36M, Hilti DX 460, Hilti DX5, Hilti DX 6 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Deburring tool accessories Ruko 107025 Unigrat “steel tool holder” type E
Serrated lock washer, internally serrated, shape J DIN 6798 zinc-plated steel, blue passivated (A2K). Internally serrated.
Nature work dungarees
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated
FKM 75 Shore O-ring ISO 3601-1
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Threaded rod DIN 976, A2-70 stainless steel, shape A
NC machine reamer HSCO WN, H7 universal
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, zinc-plated
Frame for VS TAL Larder wall cupboard full pull-outs
