Collated nail UMA 221/10
Nail collated UMA 221/10
NL-(UMA221/10)-MG-16MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. thickness 5 mm):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
10 collated high-quality universal nails for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) compliant with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Number of nails | 10 |
Shaft length (SL) | 16 mm |
Shank diameter (Øds) | 3.7 mm |
Length of magazine (LG) | 93 mm |
Suitable for device type | Würth BST MA-75, Hilti DX 350, Hilti DX 36M, Hilti DX 460, Hilti DX5, Hilti DX 6 |
Last viewed
Sealing plug GPN 300 F Polyethylene (PE-LD), natural
Wago Micro push-wire connector, screwless
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Rust remover Rost-Off
Ball valve
Hexagonal bolt with flange in accordance with MBN standard
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Clamp with fastening lugs SL MINI W4
High-visibility jacket
Stud with head, shape B