Collated nail UMA 221/10
Nail collated UMA 221/10
NL-(UMA221/10)-MG-22MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. thickness 5 mm):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
10 collated high-quality universal nails for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) compliant with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Number of nails | 10 |
Shaft length (SL) | 22 mm |
Shank diameter (Øds) | 3.7 mm |
Length of magazine (LG) | 93 mm |
Suitable for device type | Würth BST MA-75 |
Last viewed
Work dungarees
Cover For wiring duct VKW DIN
Cylindrical roller bearing FAG
L-shaped push-in fitting with male and female thread
Work dungarees
Concealed hinge, Nexis click-on 100
Work shirt HAKRO 281 T-shirt MIKRALINAR®
Safety shoe S1PL Uvex1 XCraft 6802
Protective glove, disposable
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain