Collated nail UMA 221/10
Nail collated UMA 221/10
NL-(UMA221/10)-MG-52MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. thickness 5 mm):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
10 collated high-quality universal nails for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) compliant with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Number of nails | 10 |
Shaft length (SL) | 52 mm |
Shank diameter (Øds) | 3.7 mm |
Length of magazine (LG) | 93 mm |
Suitable for device type | Würth BST MA-75 |
Last viewed
Brake piston resetting adapter
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, plain
Cable ties with metal latch closure, heat-stabilised – industrial quality
Case insert for MASTER/M-CUBE power tools
Countersunk head screw with recessed head, H DIN 965, steel 8.8, plain
Solid carbide end mill With Speedcut Universal corner radius, extra-long XXL, optional, four cutting edges, uneven angle of twist gradient
Disc spring for ball bearing
Hexagonal bolt with shank and fine thread DIN 960, steel 8.8, plain
Hexagonal bolt with shank
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal