Collated nail UMA 221/10
Nail collated UMA 221/10
NL-(UMA221/10)-MG-57MM
Register now and access more than 125,000 products
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shank length
Length calculation for nails used on steel surfaces (min. thickness 5 mm):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
10 collated high-quality universal nails for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) compliant with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Number of nails | 10 |
Shaft length (SL) | 57 mm |
Shank diameter (Øds) | 3.7 mm |
Length of magazine (LG) | 93 mm |
Suitable for device type | Würth BST MA-75, Hilti DX 350, Hilti DX 36M, Hilti DX 460, Hilti DX5, Hilti DX 6 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Mounting clip, PA6 MOD BS SGA
S1 safety shoe Steitz Salix
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Malleable iron screw clamp with protective caps
Telescopic rod with round mirror
Identification rings, PVC
Low-cut safety shoes S3
Belt strap For wooden ladders
Hexagon nut, low profile, inch
Skin protection lotion Ultra
