Collated nails and gas cartridge NG CS-1 For DIGA CS-1
Collated nails and gas cartridge NG CS-1
NL-(DIGA CS1)-FUELCELL-PULSA1000-38MM
Register now and access more than 125,000 products
One packing unit includes 1000 nails and one fuel cell
IBMP MPA TU Braunschweig (Germany)
Expert opinion on fire behaviour of light partition walls made from gypsum plasterboard in accordance with DIN 4102-4: 1994-03
All nails are suitable for secondary attachments (without general construction permit). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Datasheets(X)
- For fastening U-profiles in dry walling
- Fastenings on concrete, steel, masonry and wood in electrical and installation work, dry walling etc.
Material of nail | Steel |
Surface | Zinc plated yellow |
Length of nail | 38 mm |
Diameter of nail | 2.6 mm |
Head diameter | 6.3 mm |
Number of nails | 1000 PCS |
Contents | 80 ml |
Container | Cartridge |
Last viewed
Tyre inflator with analogue calibration with 2C handle
Low-cut safety shoes, S3
TIME-SERT® screw-in tool
Shim ring DIN 988, steel, plain
Stud with threaded end ≈ 1 d DIN 938, steel 8.8, plain
Multi-use bandsaw blade
Threaded fitting fine thread
Serrated locking nut with locking teeth Steel strength class 8, zinc-plated, blue passivated (A2K)
Tab washer, external tab DIN 432, zinc-plated steel, blue passivated (A2K)
Work trousers