Collated nails and gas cartridge NG CS-2/3 HFBX Suitable for DIGA CS-2 Power and DIGA CS-3 Power
Collated nails and gas cartridge NG CS-2/3 HFBX
NL-(DIGA CS2/3)-FUELCELL-HFBX-32MM
Register now and access more than 125,000 products
- High-quality special nail with rolled ballistic tip for fastenings in high-strength concrete
- Fewer setting failures than with conventional nails
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or tightening tests.
Datasheets(X)
Attachments on concrete substrate (normal weight concrete ≥ C 20/25 ≤ C 50/60) according to DIN EN 206, steel and solid brick masonry in the installation area, dry walling, etc.
Material of nail | Steel, specially hardened |
Surface | Zinc plated |
Length of nail | 32 mm |
Diameter of nail | 3.0 mm |
Head diameter | 6.3 mm |
Number of nails | 800 PCS |
Contents | 69 ml |
Container | Cartridge |
Last viewed
Short sanding belt Klingspor LS 309 XH
Welder glove
Screw-on fastening base
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
MFD-S multi-purpose drill bit with straight shank
System insert, plastic, 4.4.1
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Type SKD coupling sleeve With hexagon socket and flange
Intermediate layer for ISO S clamping system