Welcome to Würth Aerospace Solutions For trade customers only
Combination joist hanger 1.5 mm One piece - JOISTHNG-COMBI-(EXCRANKED)-60X120X1,5 Combination joist hanger 1.5 mm One piece - JOISTHNG-COMBI-(EXCRANKED)-60X120X1,5
Combination joist hanger 1.5 mm One piece - JOISTHNG-COMBI-(EXCRANKED)-60X120X1,5 - 1
Combination joist hanger 1.5 mm One piece - JOISTHNG-COMBI-(EXCRANKED)-60X120X1,5 - 2

Combination joist hanger 1.5 mm One piece

Combi joist hanger 1.5 mm
JOISTHNG-COMBI-(EXCRANKED)-60X120X1,5

Art.-no. 5390060120
EAN 4050382108692
All versions

Prices for customers after login
Combination joist hanger 1.5 mm One piece

Art.-no. 5390060120

Prices for customers after login
Quantity
PU
x 40 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Economical, lightweight joist hanger (angled outwards) for load-bearing connection of timber joists to wood, concrete or steel. Ideal for standard cross-sections

Reduced weight for easy handling

Proof of Performance

European Technical Approval ETA-08/0184

Notice

Diameter of bolts/screws may not be any smaller than the diameter of the hole minus 1 mm. The upper bolts must be fitted with a washer in line with DIN EN ISO 7094.


The respective basic conditions of the applicable anchor approval must be observed.

European Technical Approval ETA-08/0184

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Load-bearing connections of timber joists to wood, concrete or steel

Instructions

Suitable fasteners:


  • Ribbed nail in line with EN 14592: 4.0x25–100 mm (fax, k ≥ 50 × 10-6 × ρk2 (N/mm²))

  • ASSY joist hanger screw in line with ETA 11/1090: 5.0x25–50 mm

  • Wood screw in line with EN 14592: 5.0x25–50 mm

  • ASSY 3.0 combination screw in line with ETA 11/0190: d = 10 mm

  • Bolts in accordance with manufacturer's specifications: M10

  • Recommended dowels for anchoring in concrete: W-BS; W-FAZ; W-VIZ; W-VM 250

Width x height

60 x 120 mm

Thickness

1.5 mm

Number of D 5 mm holes in subcarrier nJ + main carrier nH

10 + 18 PCS

Number of D 11 mm holes in subcarrier nJ + main carrier nH

0 + 4 PCS

Weight

218 g

Depth of underside

70 mm

Material

Steel

Surface

Hot dip galvanized

Width of wing on nut

39 mm

Approval

ETA-08/0184

Material designation

S250GD

Material standard

DIN EN 10346:2009

Number of pieces

1 PCS

Depth of upper side

37 mm

CHARACTERISTIC LOAD-BEARING CAPACITIES IN KN OF WÜRTH COMBINATION JOIST HANGERS 1.5 MM (ETA-08/0184) WITH WÜRTH ANCHOR NAILS
Art. no.Format in mmComplete nailingPartial nailing
Fz,down,RkFz,up,RkFy,RkFz,down,RkFz,up,RkFy,Rk
4x404x604x404x604x404x604x404x604x404x604x404x60
5390 060 10060/10012,418,97,4011,94,807,196,309,764,577,322,403,59
5390 060 12060/12017,725,811,918,85,668,298,9713,67,1311,23,404,98
5390 060 13060/13020,627,914,522,86,038,7511,917,210,012,93,264,71
5390 060 16060/16027,134,423,330,16,969,8215,121,513,217,23,975,61
5390 060 19060/19032,140,828,836,57,6410,618,623,615,219,33,995,50
5390 070 12570/12518,725,811,918,85,998,969,5714,47,1311,23,605,38
5390 080 12080/12017,725,811,918,86,249,498,9713,67,1311,23,755,70
5390 080 14080/14023,630,117,325,87,1610,711,917,210,012,93,535,23
5390 080 15080/15025,432,220,227,97,5811,215,119,311,815,04,055,98
5390 080 18080/18030,438,727,134,48,6612,516,921,513,517,24,226,05
5390 080 21080/21035,545,132,140,89,5113,520,325,816,921,54,936,95
5390 100 140100/14023,630,117,325,87,6511,711,917,210,012,93,785,77
5390 100 160100/16027,134,423,330,18,6113,015,121,513,217,24,927,44
5390 100 170100/17028,836,525,432,29,0513,616,921,513,517,24,787,15
5390 100 200100/20033,842,930,438,710,215,020,325,816,921,55,698,35
5390 120 160120/16027,134,423,330,19,0413,915,121,513,217,25,167,97
5390 120 180120/18030,438,727,134,410,015,316,921,513,517,24,947,47
5390 120 190120/19032,140,828,836,510,515,918,623,615,219,35,518,32
5390 140 180140/18030,438,727,134,410,416,116,921,513,517,25,147,92
Measured load capacity value: Fi,Rd = Fi,Rk × kmod/ƳM
For combined effect of action, the following condition must be met:

(Fy, Ed /Fy, Rd)^2+ (Fz, Ed /Fz, Rd)^2 ≤1
Notes:
Load-bearing capacities are valid for wood with a characteristic density Ƥk = 350 kg/m³.
Nail load-bearing capacities according to EN 1995-1-1. Pull-out capacity for load-bearing capacity class 3 according to DIN EN 1995-1-1/NA.
Würth ASSY joist hanger screws according to ETA-11/0190.
The force Fz acts in the centre of the secondary beam. The force Fy acts on the top edge of the joist hanger. In the case of a load application below the top edge of the joist hanger, the table values can be used on the safe side. At a different spacing of the force Fy, the load-bearing capacity can be determined according to ETA-08/0184.
Partial nailing: On the main support, the fasteners must be placed in the rows closest to the secondary beam. On the secondary beam, the fasteners must be evenly spaced over the height of the beam. The fasteners must always be arranged in the upper and lower holes.
The main support must be secured to prevent torsion.
The transverse tensile capacity of the main support must be investigated separately.
For one-sided connections on the main support, the offset moment must be taken into account.
The regulations of ETA-08/0184 must be observed.
Format in mmComplete nailingPartial nailing
Fz,down,RkFz,up,RkFy,RkFz,down,RkFz,up,RkFy,Rk
5x405x505x405x505x405x505x405x505x405x505x405x50
70/12525,827,521,522,911,112,317,218,312,913,86,697,36
80/12025,827,521,522,912,213,517,218,312,913,87,338,12
80/14030,132,125,827,513,314,617,218,312,913,86,427,04
80/15032,234,427,929,813,715,019,320,615,016,07,277,96
80/18038,741,334,436,714,615,921,522,917,218,37,007,60
80/21045,148,140,843,615,316,525,827,521,522,97,848,48
100/14030,132,125,827,515,417,117,218,312,913,87,508,31
100/16034,436,730,132,116,518,221,522,917,218,39,4510,4
100/17036,539,032,234,417,018,721,522,917,218,38,879,75
100/20043,045,838,741,318,119,725,827,521,522,910,011,0
120/16034,436,730,132,118,620,721,522,917,218,310,611,8
120/18038,741,334,436,719,721,921,522,917,218,39,5110,5
120/19040,843,636,539,020,222,323,625,219,320,610,511,6
140/18038,741,334,436,721,724,221,522,917,218,310,511,7
60/10021,522,917,218,38,969,8512,913,88,609,174,484,93
60/12025,827,521,522,99,9310,917,218,312,913,85,966,51
60/13027,929,823,625,210,311,217,218,312,913,85,516,00
60/16034,436,730,132,111,112,021,522,917,218,36,356,87
60/19040,843,636,539,011,612,523,625,219,320,66,016,48
Design value for load capacity: Fi,Rd = Fi,Rk × kmod/gM
For combined effect of action, the following condition must be met:

Notes:
· Load capacities are valid for wood with a characteristic raw density Rk = 350 kg/m³.
· Nail load capacities in accordance with EN 1995-1-1. Pull-out capacities for load capacity class 3 according to DIN EN 1995-1-1/NA.
· Würth ASSY joist hanger screws in accordance with ETA-11/0190.
· The force Fz acts in the centre of the secondary beam. The force Fy acts on the top edge of the joist hanger. In the case of a load application below the top edge of the joist hanger, using the table values is a safe approach. At a different spacing of the force Fy, the load capacity can be determined in accordance with ETA-08/0184.
· Partial nailing: On the main beam, the fasteners must be placed in the rows closest to the secondary beam. On the secondary beam, the fasteners must be evenly spaced over the height of the beam. Fasteners must always be placed in the top and bottom holes.
· The main beam must be secured to prevent torsion.
· The transverse strength of the main beam must be determined separately.
· For one-sided connections on the main beam, the offset moment must be taken into account.
· The specifications of ETA-08/0184 must be observed.
Partial and complete nailing of Würth combination joist hangers 1.5 mm
Parameters of Würth combination joist hanger 1.5 mm according to ETA-08/0184
Format
w/H [mm]		Complete nailingPartial nailing
nHnJkH1kH2e1e2nHnJkH1kH2e1e2
[pcs][pcs] mmmm[pcs][pcs] mmmm
60/160261455,137,41667177414826,821,77931110
60/19032177957,2193825461894336,610041883
70/125181032,317,61581106810615,810,7767634
80/120181029,717,61817114010614,410,7894669
80/140221241,526,61954150512620,115,7943887
80/15024134831,71995167914726,821,710171150
80/180301670,650,12307243416834,428,711091468
100/140221241,526,62487167612620,115,71223965
100/170281562,643,52704232816834,428,713741526
100/20034188864,730543201181043,336,614791881
120/160261455,137,43262231614826,821,716071314
120/180301670,50,13451283316834,428,716861612
60/100148 19,910,61252708849,686,61620426
60/120181029,717,6136699910614,410,7652604
60/130201135,421,91394113612620,115,7713829
80/210361997,472,726163319201052,245,513442295
100/160261455,137,42649211614826,821,712881223
120/19032177957,2351830841894336,617851955
140/180301670,650,14145306316834,428,720431717
CHARACTERISTIC LOAD-BEARING CAPACITIES IN kN OF WÜRTH COMBINATION JOIST HANGERS 1.5 MM (ETA-08/0184) WITH WÜRTH ANCHOR NAILS
Art. no.Format in mmComplete nailingPartial nailing
Fz,down,RkFz,up,RkFy,RkFz,down,RkFz,up,RkFy,Rk
4x404x604x404x604x404x604x404x604x404x604x404x60
5390 060 16060/16027,134,423,330,16,969,8215,121,513,217,23,975,61
5390 060 19060/19032,140,828,836,57,6410,618,623,615,219,33,995,50
5390 070 12570/12518,725,811,918,85,998,969,5714,47,1311,23,605,38
5390 080 12080/12017,725,811,918,86,249,498,9713,67,1311,23,755,70
5390 080 14080/14023,630,117,325,87,1610,711,917,210,012,93,535,23
5390 080 15080/15025,432,220,227,97,5811,215,119,311,815,04,055,98
5390 080 21080/21035,545,132,140,89,5113,520,325,816,921,54,936,95
5390 100 140100/14023,630,117,325,87,6511,711,917,210,012,93,785,77
5390 100 160100/16027,134,423,330,18,6113,015,121,513,217,24,927,44
5390 100 170100/17028,836,525,432,29,0513,616,921,513,517,24,787,15
5390 120 160120/16027,134,423,330,19,0413,915,121,513,217,25,167,97
5390 120 180120/18030,438,727,134,410,015,316,921,513,517,24,947,47
5390 120 190120/19032,140,828,836,510,515,918,623,615,219,35,518,32
5390 140 180140/18030,438,727,134,410,416,116,921,513,517,25,147,92
5390 060 10060/10012,418,97,4011,94,807,196,309,764,577,322,403,59
5390 060 12060/12017,725,811,918,85,668,298,9713,67,1311,23,404,98
5390 060 13060/13020,627,914,522,86,038,7511,917,210,012,93,264,71
5390 080 18080/18030,438,727,134,48,6612,516,921,513,517,24,226,05
5390 100 200100/20033,842,930,438,710,215,020,325,816,921,55,698,35
Measured load capacity value: Fi,Rd = Fi,Rk × kmod/ƳM
For combined effect of action, the following condition must be met: (Fy, Ed /Fy, Ed)^2+ (Fz, Ed/Fz, Rd)^2 ≤1
Notes:
· Load-bearing capacities are valid for wood with a characteristic density Ƥk = 350 kg/m³.
· Nail load-bearing capacities according to EN 1995-1-1. Pull-out capacity for load-bearing capacity class 3 according to DIN EN 1995-1-1/NA.
· Würth ASSY joist hanger screws according to ETA-11/0190.
· The force Fz acts in the centre of the secondary beam. The force Fy acts on the top edge of the joist hanger. In the case of a load application below the top edge of the joist hanger, the table values can be used on the safe side. At a different spacing of the force Fy, the load-bearing capacity can be determined according to ETA-08/0184.
· Partial nailing: On the main support, the fasteners must be placed in the rows closest to the secondary beam. On the secondary beam, the fasteners must be evenly spaced over the height of the beam. The fasteners must always be arranged in the upper and lower holes.
· The main support must be secured to prevent torsion.
· The transverse tensile capacity of the main support must be investigated separately.
· For one-sided connections on the main support, the offset moment must be taken into account.
· The regulations of ETA-08/0184 must be observed.
NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.
Art. no.Format in mmComplete nailingPartial nailing
Fz,down,RkFz,up,RkFy,RkFz,down,RkFz,up,RkFy,Rk
5x405x505x405x505x405x505x405x505x405x505x405x50
5390 060 16060/16034,436,730,132,111,112,021,522,917,218,36,356,87
5390 060 19060/19040,843,636,539,011,612,523,625,219,320,66,016,48
5390 070 12570/12525,827,521,522,911,112,317,218,312,913,86,697,36
5390 080 12080/12025,827,521,522,912,213,517,218,312,913,87,338,12
5390 080 14080/14030,132,125,827,513,314,617,218,312,913,86,427,04
5390 080 18080/18038,741,334,436,714,615,921,522,917,218,37,007,60
5390 080 21080/21045,148,140,843,615,316,525,827,521,522,97,848,48
5390 100 140100/14030,132,125,827,515,417,117,218,312,913,87,508,31
5390 100 160100/16034,436,730,132,116,518,221,522,917,218,39,4510,4
5390 100 200100/20043,045,838,741,318,119,725,827,521,522,910,011,0
5390 120 160120/16034,436,730,132,118,620,721,522,917,218,310,611,8
5390 120 190120/19040,843,636,539,020,222,323,625,219,320,610,511,6
5390 140 180140/18038,741,334,436,721,724,221,522,917,218,310,511,7
5390 060 10060/10021,522,917,218,38,969,8512,913,88,609,174,484,93
5390 060 12060/12025,827,521,522,99,9310,917,218,312,913,85,966,51
5390 060 13060/13027,929,823,625,210,311,217,218,312,913,85,516,00
5390 080 15080/15032,234,427,929,813,715,019,320,615,016,07,277,96
5390 100 170100/17036,539,032,234,417,018,721,522,917,218,38,879,75
5390 120 180120/18038,741,334,436,719,721,921,522,917,218,39,5110,5
Measured load capacity value: Fi,Rd = Fi,Rk × kmod/ƳM
For combined effect of action, the following condition must be met: (Fy, Ed /Fy, Ed)^2+ (Fz, Ed/Fz, Rd)^2 ≤1
Notes:
· Load-bearing capacities are valid for wood with a characteristic density Ƥk = 350 kg/m³.
· Nail load-bearing capacities according to EN 1995-1-1. Pull-out capacity for load-bearing capacity class 3 according to DIN EN 1995-1-1/NA.
· Würth ASSY joist hanger screws according to ETA-11/0190.
· The force Fz acts in the centre of the secondary beam. The force Fy acts on the top edge of the joist hanger. In the case of a load application below the top edge of the joist hanger, the table values can be used on the safe side. At a different spacing of the force Fy, the load-bearing capacity can be determined according to ETA-08/0184.
· Partial nailing: On the main support, the fasteners must be placed in the rows closest to the secondary beam. On the secondary beam, the fasteners must be evenly spaced over the height of the beam. The fasteners must always be arranged in the upper and lower holes.
· The main support must be secured to prevent torsion.
· The transverse tensile capacity of the main support must be investigated separately.
· For one-sided connections on the main support, the offset moment must be taken into account.
· The regulations of ETA-08/0184 must be observed.
NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons.
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X40MM

Galvanised steel, blue coated (A2K)
x 3000 pcs
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X50MM

Galvanised steel, blue coated (A2K)
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X60MM

Galvanised steel, blue coated (A2K)
Comb nail / anchor nail
Comb nail / anchor nail

RIDGNL-(A3K)-4X75MM

Galvanised steel, blue coated (A2K)
x 250 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-10-M10X85

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-20-M10X95

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-30-M10X105

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-60-M10X135

x 10 pcs
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)

ANC-(W-VIZ-A/S)-(A2K)-100-M10X175

x 10 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details