Combined abrasive fleece/cloth matting body (mixed corundum)
Combi matting body
MATBDY-COMBI-G180/150-50X30X6MM
Register now and access more than 125,000 products
High sanding effect
Additional abrasive cloths between the abrasive fleece
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 50 x 30 x 6 mm |
Colour | Red brown |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Last viewed
Locking system, DPS
W-RO 13 round plate
Moldex seal and valve set 9974
Taper washer, U-section
PERFECT car shampoo
Body sealing plugs assortment 450 pieces in system case
Shoulder screw with thread and slot
Countersunk head screw, inch, aerospace MS 24667, zinc-plated steel, UNC
Cylindrical grooved pin with chamfer DIN 1473, A1 stainless steel, plain
EPS profile thumbturn cylinder