Combined abrasive fleece/cloth matting body (mixed corundum)
Combi matting body
MATBDY-COMBI-G180/150-60X40X6MM
Register now and access more than 125,000 products
High sanding effect
Additional abrasive cloths between the abrasive fleece
- At high rotation speeds, coarse grain acts finer, and at low speeds fine grain acts coarser
- Use tools with a low contact pressure; heavy contact pressure causes premature wear
- If there is insufficient removal, do not increase the contact pressure. Instead, use coarser grains
Datasheets(X)
Diameter x width x shaft diameter | 60 x 40 x 6 mm |
Colour | Red brown |
Material to be processed | Wood, Cr-Ni and other stainless steels, C-steel, Grey cast iron, Non-ferrous metal, Forged steel, Steels bands, Malleable cast iron, Deep-drawn steel, Injection-moulded zinc |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Polo shirt, long-sleeved SOL'S L549
Women's polo shirt Hakro 110
Washer and nut WN-810 steel plain
Screw tap, machine, blind hole Ruko M DIN 371 HSCo plain shape C
Chemical injection mortar PURE EPOXY WIT-PE 1000
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Soft support Mirka for wall and ceiling sander Miro 955/955S
W-KLT 2.0 ESD
Triple square bit