Commercial vehicles, slotted bushing tool set without hydraulics Universal, 34 pieces

• The tools can be used directly on the car without the time-consuming need to dismantle entire axle components


• These pressure pieces are also suitable for use on the workshop press


• With the help of the clamping block and the corresponding half-shells, the bushings are preloaded gently and in parallel, which means that they can be easily pressed into the intake


• While the bushing is often damaged in commercially available cone sleeves, with this clamping block system you can mount parts without damaging/deforming/dismantling the bearing sheath


• The half-shells are securely fixed in the clamping block, which prevents them from slipping out


• The set includes a selection of the most popular applications with wide market coverage


• We recommend using a hydraulic cylinder due to the occasional extreme level of force required for the removal. Our 17 t hydraulic cylinder (art. no. 1952004090) is therefore ideal as a supplement

Scope of delivery

• 1x clamping block


• 9x half-shell sets (dia. 56-75 mm)


• 9x pressure pieces for half-shell sets, dia. 56-75 mm


• 1x U spacer


• 1x intake tread board for hydraulic cylinder


• 2x intake sleeves, short, dia. 75 + 88 mm


• 2x intake sleeves, long, dia. 75 + 88 mm


• 1x spindle M20, L = 520 mm


• 2x pressure nut M20


• 2x U-washers


• 1x fixing screws set for half shells, 4 pieces


• 1x hexagon key


• 1x spindle grease