Compressed air spray

Non-flammable!

Can be used in low-voltage areas meeting VDE 0100 (voltage range: <50 V (AC), <120 V (DC)) even while energised.

Easy to use

• Always ready to hand, regardless of compressor, power or pressure lines


• Long spray tube enables accurate spraying

Dry and oil-free compressed gas

• Leaves no residue behind


• Good material compatibility

High pressure and high density

Easy to use and universal application

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.