Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-CU-M10,0/25SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 25 mm² |
Flange hole | M10 |
Code number according to standard | 10 |
Wire diameter (d1) | 7 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (l1) | 38 mm |
Sleeve length | 20 mm |
Width (b) | 17 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Locking system DUAL
PZ screwdriver With round shank
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel, strength class 10.9, zinc-nickel-plated, black (ZNBHL)
Hexagon head bolt
Low-cut safety shoe S2
Safety boots, S2
Asphalt screw anchor pipe reducer
Connecting technology
Work dungarees
Hexagon socket set screw with pin ISO 4028, steel, 45H, plain