Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-CU-M10,0/95SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 95 mm² |
Flange hole | M10 |
Code number according to standard | 18 |
Wire diameter (d1) | 13.5 mm |
Diameter of hole (d2) | 10.5 mm |
Distance between sleeve end and centre of hole (l1) | 65 mm |
Sleeve length | 35 mm |
Width (b) | 28 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Protective glove, knitted and coated
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Ribbed nut
Cetus S3 safety boots
Hexagon Socket Head Cap Screw with centre, with low head
Thread cutter for TIME-SERT® Made of HSS
Raised countersunk head screw with recessed head, H ISO 7047, steel 4.8, zinc-nickel, black (ZNBHL)
Hexagon bolt with shank
K Plus insulation pipe clamp With separate insulation part
Grinding mesh roll with rip-tape Abranet