Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-CU-M5,0/6SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 6 mm² |
Flange hole | M5 |
Code number according to standard | 5 |
Wire diameter (d1) | 3.8 mm |
Diameter of hole (d2) | 5.3 mm |
Distance between sleeve end and centre of hole (l1) | 24 mm |
Sleeve length | 10 mm |
Width (b) | 8.5 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Cable feed device CPS 3
Die-cast zinc base with anti-slip plate
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Round pan rivets
Flat washers Standard range ISO 7089 polyamide 6.6 natural
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Abrasive flap disc Klingspor SMT 628 Supra
Hexagonal bolt with shank DIN 931, steel 8.8, zinc-plated, blue passivated (A2K)
Knob cylinder 3KS
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment