Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-CU-M6,0/25SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 25 mm² |
Flange hole | M6 |
Code number according to standard | 10 |
Wire diameter (d1) | 7 mm |
Diameter of hole (d2) | 6.4 mm |
Distance between sleeve end and centre of hole (l1) | 38 mm |
Sleeve length | 20 mm |
Width (b) | 14 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
O-ring, metric
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Work vest
Special mechanic's glove Uvex HexArmor® ThornArmor® 3092
Welder clothing
Hose clamp SS2298, W1
System bolt For system connector SV 20 E
Softshell jacket Evolution logo Kardex
Slotted headless screw with flat point DIN 427, A1 stainless steel, plain