Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-M12,0/240SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 240 mm² |
Flange hole | M12 |
Code number according to standard | 28 |
Wire diameter (d1) | 21.5 mm |
Diameter of hole (d2) | 13 mm |
Distance between sleeve end and centre of hole (l1) | 92 mm |
Sleeve length | 40 mm |
Width (b) | 42 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Hexagon head bolt With thin shaft in hygienic design
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 8.8, blue passivated (A2K)
Brass, metric, EMC cable gland in accordance with EN 60423 with contact spring
Specially fused alumina sanding tip, pink
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Cable grommet with cross recess membrane, PVC
Fire-retardant divider
Contact tip MB 25 AK For welding torch MB 25 AK
Soft wax