Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-M16,0/300SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 300 mm² |
Flange hole | M16 |
Code number according to standard | 32 |
Wire diameter (d1) | 24.5 mm |
Diameter of hole (d2) | 17 mm |
Distance between sleeve end and centre of hole (l1) | 100 mm |
Sleeve length | 50 mm |
Width (b) | 48 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Screw seal, self-centring
Flat blade fuse MICRO 3 Silver
Disposable protective clothing
Work trousers
Safety boots, S2
Low-cut safety shoe S2
Concrete screw with countersunk head W-BS 2/A4 type CS
Plastic end cap, round For pipes
Countersunk head screw with hexagon socket ISO 10642, steel, strength class 10.9, zinc flake, silver (ZFSHL)
Screw-on fastening base – countersunk head