Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-M16,0/50SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 50 mm² |
Flange hole | M16 |
Code number according to standard | 14 |
Wire diameter (d1) | 10 mm |
Diameter of hole (d2) | 17 mm |
Distance between sleeve end and centre of hole (l1) | 55 mm |
Sleeve length | 28 mm |
Width (b) | 28 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Plug cnnctr, trailer, vehicle/trck accss
Flange tube for folding mobile scaffolding 75/180
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Securing tab for beam clamp
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Safety shoe S1P Jalas 9518
Drilling screw, hexagon head with sealing washer piasta®
Ring-shaped crimp cable lug DIN 46234 and similar
Tile protector For tile levelling blocks
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A4-70 stainless steel, plain, with nut ISO 4032