Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-M20,0/1200SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 120 mm² |
Flange hole | M20 |
Code number according to standard | 20 |
Wire diameter (d1) | 15.5 mm |
Diameter of hole (d2) | 21 mm |
Distance between sleeve end and centre of hole (l1) | 70 mm |
Sleeve length | 35 mm |
Width (b) | 38 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Ear defenders
Hexagon nut with fine thread DIN 934, steel I10I, plain
Bolt with head
Twist drill DIN 340 HSS type RN
Low-cut safety shoes, S1P
S3 safety shoe Heckel Maccrossroad3.0 low Boa
Hexagonal bolt with shank
1/2 inch power extension With 1/2 inch square drive and ball lock
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Flat washer - large external diameter ISO 7093-1 steel 200 HV zinc-plated, blue passivated (A2K)