Compression cable lug DIN 46235
Compression cable lug DIN 46235
COMPCBLLUG-DIN46235-M20,0/240SMM
Register now and access more than 125,000 products
- For single, multi, fine and superfine wire copper conductors e.g. in accordance with DIN EN 60228 Class 1, 2, 5 and 6
- With markings for correct crimping
The user must check the inserted cable (using a pull-out test, if required).
Datasheets(X)
 | |
Wire cross section | 240 mm² |
Flange hole | M20 |
Code number according to standard | 28 |
Wire diameter (d1) | 21.5 mm |
Diameter of hole (d2) | 21 mm |
Distance between sleeve end and centre of hole (l1) | 92 mm |
Sleeve length | 40 mm |
Width (b) | 45 mm |
Max. temperature resistance | 125 °C |
Material | Electrolytic copper |
Surface | Tin plated |
Last viewed
Adapter For Kärcher high-pressure devices
Slotted cylinder head screw ISO 1207, A4-70 stainless steel, plain
Timing tool set 7 pieces, for Opel 1.0-1.2-1.4, petrol
Marking fluid For ICSS 300-P marking sets
Countersunk head screw with recessed head, H ISO 7046-1, steel 4.8, zinc-plated, blue passivated (A2K)
Sandpaper strip Useit® Superpad wood
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Flat cover cap, for hexalobular socket and AW drive
Low-cut safety shoes, S1P
Flat cover cap, for hexalobular socket and AW drive