Concrete angle bracket type P
Concrete angle, type P
CONCANGL-P-DWLABLE-(TZN)-H100MM
Register now and access more than 125,000 products
- Robust, solid design
- Sheet metal hot-dip galvanised on both sides (S235 + Z275 (approx. 20 µm))
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
European Technical Approval ETA-09/217
The diameter of bolts/screws/anchors may only be max. 2 mm smaller than the diameter of the hole.
The respective basic conditions of the applicable anchor approval must be observed.
European Technical Approval ETA-09/217
Datasheets(X)
Load-bearing connections of timber joists to wood or concrete
Suitable fasteners:
- ASSY 3.0 combination screw in line with ETA 11/0190: d = 12 mm
- Bolts according to manufacturer specification: d = 12 mm
- Recommended dowels for anchoring in concrete: W-BS; W-FAZ; W-VIZ; WIT-VM 250; WIT-UH 300
 | |
Width x height x depth | 60 x 100 x 75 mm |
Thickness | 6 mm |
Diameter of hole (Ø) | 14 mm |
Distance between wall support and elongated hole (C) | 22.5 mm |
Distance between support and centre of hole (A) | 80 mm |
Weight | 428 g |
Approval | ETA-09/0217 |
Material | Steel |
Surface | Hot dip galvanized |
Material designation | S235 |
| Characteristic load-bearing capacity in kN of ONE angle bracket P/S according to ETA-09/0217 with anchor nails - purlin/post | ||||
| Angle bracket P/S3) | Article number | ETA | F1,Rk | |
| Secured with fasteners1) | ||||
| Width x length x depth x thickness in mm | Steel | |||
| kN | ||||
| 1 bracket P/S | 50x75x50x6 mm | 0681 630 075 | 09/0217 | 2,4 |
| 60x100x75x6 mm | 0681 630 100 | 09/0217 | 2.40 | |
| 60x150x75x6 mm | 0681 630 150 | 09/0217 | 4.2 | |
| 50x100x50x8 mm | 0681 636 100 | 09/0217 | 5.24 | |
| 1) Always use a U-washer for the appropriate diameter 3) If one angle bracket is used for each connection, the connected component must be secured against twisting. | ||||
| Steel or reinforced concrete connection with a stud/stud anchor | ||||
| Angle bracket P/S | eB (MIN/MAX) | z (MIN/MAX) | Min = (1+eB/z) | Max = (1+eB/z) |
| 50x75x50x6 mm | 22.5/52.5 | 52.5/22.5 | 1,42 | 3.33 |
| 60x100x75x6 mm | 22.5/52.5 | 52.5/22.5 | 1,42 | 3.33 |
| 60x150x75x6 mm | 22.5/52.5 | 52.5/22.5 | 1,42 | 3.33 |
| 50x100x50x8 mm | 22,5 | 52,5 | 1,42 | 1.42 |
| FB,Ed=F1,d x(1+(eB/z)) | ||||
| NOTE: These are guides for planning purposes. The values must be calculated for each project by authorised persons. | ||||
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagonal bolt with shank DIN 931, steel 12.9, plain
Work dungarees
EPS profile thumbturn cylinder
Slotted, fully threaded hexagonal bolt
Work trousers
Blind rivet, flat head
Work poloshirt
Twist drill bit, metal Ruko hollow profile drill bit HSS-G black oxidised type N
Threaded rod DIN 976, A2-70 stainless steel, shape A
Hexagon nut, low profile with fine thread DIN 439, steel 4, plain