Concrete pin OMG® DCDF-55 (CD-10)
Masonry nail OMG-DCDF-55 CD-10
PIN-CONCRETE-(DCDF-55114)-5,5X114
Register now and access more than 125,000 products
- Fastener length on concrete = roof structure + impact depth min. 25 mm
- Drill hole depth = fastener length + min. 10 mm
- ETA-09/0337 approval
- FM approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
 | |
Anchor diameter | 5.5 mm |
Anchor length (l) (l) | 114 mm |
Disc diameter | 11 mm |
Nominal drill-bit diameter (d 0) | 5.5 mm |
Embedding depth (h nom) | 25 mm |
Type description | OMG-DCDF-55 |
Material | Steel, case-hardened |
Surface | Cathodic dip painting |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Tab washer, external tab DIN 432, zinc-plated steel, blue passivated (A2K)
HSCo 90° green-ring countersink DIN 335C
CFS3100 finger scanner with Bluetooth technology
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Washer ISO 7090 steel 200 HV plain
Sleeve, reduced with female and male thread EN10242 M4, hot-dip galvanised malleable iron
Arizona® Perfect soft vehicle dry abrasive paper For all paint repair work with intermediate and fine sanding
Cut-resistant glove Ansell HyFlex 11-729
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Work overall
