Concrete screw EUROFAST ® DFCF
Steel zinc flake coat silver EUROFAST DFCF
SCR-HEX-CONCRETE-(DFCF-63043)-6,3X43
Register now and access more than 125,000 products
For use with retaining plates, shape: D (deep = 4.85 mm non-slip), XH (XtraHigh)
- Concrete quality = min. C 20/25
- Drill diameter = 5.0/5.5 mm (depending on the concrete quality)
- Drill hole depth = fastener length + min. 10 mm
- Anchor depth = min. 30 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
The fastener is not suitable for use on solid concrete or concrete hollow block boards
 | |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 43 mm |
Head diameter (d2) | 10.5 mm |
Head height (k1) | 4.5 mm |
Head type | Hexagon washer head |
Drive type | Outer hexagon |
Thread length (tapping screw thread) (l2) | 40 mm |
Material | Steel, case-hardened |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Approval | ETA-06/0007 |
Last viewed
Threaded fitting
Serrated dowel
pias® drilling screw, countersunk head with AW drive
Twist drill bit HSCo DIN 345 Type RN
Square nut, low profile DIN 562, steel 11H, plain
Grooved ball bearings, POP FAG
90° angled tube cable lug Standard (similar to DIN)
Hammer drill bit Max Quadro-L Vario
Button-head rivet
Threaded rod