Concrete screw EUROFAST ® DFCF
Steel zinc flake coat silver EUROFAST DFCF
SCR-HEX-CONCRETE-(DFCF-63305)-6,3X305
Register now and access more than 125,000 products
For use with retaining plates, shape: D (deep = 4.85 mm non-slip), XH (XtraHigh)
- Concrete quality = min. C 20/25
- Drill diameter = 5.0/5.5 mm (depending on the concrete quality)
- Drill hole depth = fastener length + min. 10 mm
- Anchor depth = min. 30 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
The fastener is not suitable for use on solid concrete or concrete hollow block boards
 | |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 305 mm |
Head diameter (d2) | 10.5 mm |
Head height (k1) | 4.5 mm |
Head type | Hexagon washer head |
Drive type | Outer hexagon |
Thread length (tapping screw thread) (l2) | 60 mm |
Material | Steel, case-hardened |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Approval | ETA-06/0007 |
Last viewed
Milling bit Ruko tungsten carbide milling bit type A cylinder (ZYAS) with spur cut TiCN
Fitting brush
Auto-Messfix
Hexagonal bolt with threading up to the head DIN 933, steel 10.9, plain
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV
Work trousers
DIN 1474 stainless steel A1 plain
Wedge lock washer W.TEC series Narrow shape
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
BASIC 8.8 system workshop trolley