Concrete screw EUROFAST ® EFR
Steel zinc flake coat silver EUROFAST EFR
SCR-RAISCS-CONCRETE-(EFR-63075)-6,3X75
Register now and access more than 125,000 products
For use with retaining plates, shape: D (deep), H (high), XH (XtraHigh), plastic funnel TLK
- Concrete quality = min. C 20/25
- Bore diameter = 5.0/5.5 mm (depending on the concrete quality)
- Drill hole depth = fastener length + min. 10 mm
- Anchor depth = min. 25 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
The fastener is not suitable for use on solid concrete or concrete hollow block boards
 | |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 75 mm |
Head diameter (d2) | 9 mm |
Head height (k1) | 3 mm |
Head type | Pan head |
Drive type | Internal TX |
Thread length (tapping screw thread) (l2) | 50 mm |
Material | Steel, case-hardened |
Surface | Flake zinc silver |
Internal drive | TX25 |
RoHS-compliant | Yes |
Approval | ETA-06/0007 |
Last viewed
ISO insert holder with C clamping system for KN indexable inserts
Disposable protective clothing
Open-end wrench with square insert shank 14x18 mm
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Hexagon Socket Head Cap Screw
Hexagon head bolt with thread up to head ISO 4017, A2-50 stainless steel, plain
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
W6RK profile thumbturn cylinder For keyed alike profile cylinders in original equipment
STARLINE® waist jacket