Concrete screw EUROFAST ® EFR
Steel zinc flake coat silver EUROFAST EFR
SCR-RAISCS-CONCRETE-(EFR-63160)-6,3X160
Register now and access more than 125,000 products
For use with retaining plates, shape: D (deep), H (high), XH (XtraHigh), plastic funnel TLK
- Concrete quality = min. C 20/25
- Bore diameter = 5.0/5.5 mm (depending on the concrete quality)
- Drill hole depth = fastener length + min. 10 mm
- Anchor depth = min. 25 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
CAD data (available after login)
The fastener is not suitable for use on solid concrete or concrete hollow block boards
 | |
Nominal diameter (d1) | 6.3 mm |
Length (l1) | 160 mm |
Head diameter (d2) | 9 mm |
Head height (k1) | 3 mm |
Head type | Pan head |
Drive type | Internal TX |
Thread length (tapping screw thread) (l2) | 50 mm |
Material | Steel, case-hardened |
Surface | Flake zinc silver |
Internal drive | TX25 |
RoHS-compliant | Yes |
Approval | ETA-06/0007 |
Last viewed
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Fully threaded hexagonal bolt and nut
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Bolt without head ISO 2340 shape A, steel plain
Cut protection glove Ejendals TEGERA® 441
Twist drill bit HSCo DIN 345 Type RN
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with threading up to head DIN 558, steel 4.6, plain
Work dungarees
Slotted cheese head