Conical countersink HSCo Ruko DIN 335 plain form C
Conical counters. HSCo DIN 335 PL form C Ruko
CNTSNK-RUKO-102115E-HSSE-CO5-90G-D11,5
Register now and access more than 125,000 products
Due to the CBN deep-ground flutes, the cutting edges are extremely sharp. Burr- and chatter-free countersinking and deburring.
Optimal results at a low cutting speed.
Datasheets(X)
Spot-facer diameter (d1) | 11.5 mm |
Shank diameter (d2) | 8.0 mm |
Length (l1) | 56 mm |
Number of cutting edges (Z) | 3 PCS |
Standards | DIN 335 |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Hexagonal bolt with shank DIN 931, steel 8.8U, hot-dip galvanised
Zinc safety spoke weight, BMW and Volkswagen Group
EPS profile thumbturn cylinder
TX bit C 6.3 (1/4 inch) with hole
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Doorstop, type B
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Hexalobular-type cheese head screw, low head
Hexagon Socket Head Cap Screw