Welcome to Würth Aerospace Solutions For trade customers only

Conical countersink HSCo Ruko ULTIMATECUT DIN 335 RUnaTEC form C

Con. counters. HSCo DIN 335 RUnaTEC form C Ruko
CNTSNKCONE-RUKO-102785EP-90GRD-D31

Art.-no. 1971004102
EAN 4007140375773

Prices for customers after login
Conical countersink HSCo Ruko ULTIMATECUT DIN 335 RUnaTEC form C

Art.-no. 1971004102

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

With completely newly developed cutting edge geometry

The axial and radial forces acting on the tool during the lowering process are reduced enormously. The specially developed, variably running relief ensures a very smooth lowering process. This produces an exact, round and chatter-free counterbore surface.


Specially developed chip flow parameters, such as chip angle, transition radius and the extra wide clamping groove ensure optimum chip and heat dissipation and thus enable a very high wear resistance. In addition, the new geometry counteracts material welding and greatly reduces the countersinking forces.


Significantly less feed force is required during the countersinking process. Materials can be machined at either very high or low cutting speeds without reducing the quality of the countersinking result.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Spot-facer diameter (d1)

31.0 mm

Shank diameter (d2)

12.0 mm

Length (l1)

71 mm

Number of cutting edges (Z)

3 PCS

Standards

DIN 335

Surface

RUnaTEC®

Shank style

3-face shank

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information