Conical countersink HSS Ruko DIN 335 TiAIN form C
Conical countersink HSS DIN 335 TiAIN form C Ruko
CNTSNK-RUKO-102116F-HSS-90G-D12,4-TIALN
Register now and access more than 125,000 products
Due to the CBN deep-ground flutes, the cutting edges are extremely sharp. Burr- and chatter-free countersinking and deburring.
Optimal results at a low cutting speed.
Datasheets(X)
Spot-facer diameter (d1) | 12.4 mm |
Shank diameter (d2) | 8.0 mm |
Length (l1) | 56 mm |
Standards | DIN 335 |
Surface | TiAlN |
Shank style | Cylindrical |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 8.8, zinc-plated, blue passivated (A2K)
Locking pin
Safety boots, S3
Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
Fully threaded hexagonal bolt and fine thread
Cylindrical pin, hardened DIN 6325, steel, plain
Threaded pin ISO 4027, steel, 45H, plain
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Threaded fitting