Conical countersink HSS Ruko DIN 335 TiAIN form C
Conical countersink HSS DIN 335 TiAIN form C Ruko
CNTSNK-RUKO-102173F-HSS-90G-D37-TIALN
Register now and access more than 125,000 products
Due to the CBN deep-ground flutes, the cutting edges are extremely sharp. Burr- and chatter-free countersinking and deburring.
Optimal results at a low cutting speed.
Datasheets(X)
Spot-facer diameter (d1) | 37.0 mm |
Shank diameter (d2) | 12.0 mm |
Length (l1) | 90 mm |
Standards | DIN 335 |
Surface | TiAlN |
Shank style | Cylindrical |
Last viewed
2C plastic adhesive 90sec.
Twist drill bit HSS DIN 338 type RW
Hexagonal bolt with shank
Low-cut safety shoes, S3
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with shank ISO 4014, steel 5.6, zinc-plated thick-film passivated (ZSML)
Hexagonal bolt with shank ISO 4014, steel 5.6, zinc-plated thick-film passivated (ZSML)
Hexagonal nut, low profile with clamping piece (non-metal insert), imperial
Hexagonal bolt with shank DIN 601, steel 4.6, zinc-plated, blue passivated (A2K), with nut
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS