Conical countersink HSS Ruko DIN 335 plain form C with long straight shank
Con. counters. HSS DIN 335 PL form C cyl. shank Ruko
CNTSNKCONE-RUKO-102275-HSS-90GRD-D15
Register now and access more than 125,000 products
Due to the CBN deep-ground flutes, the cutting edges are extremely sharp. Burr- and chatter-free countersinking and deburring.
Optimal results at a low cutting speed.
Spot-facer diameter (d1) | 15.0 mm |
Shank diameter (d2) | 10.0 mm |
Length (l1) | 110 mm |
Standards | DIN 335 |
Surface | Plain |
Shank style | Cylindrical |
Datasheets(X)
Last viewed
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain left-cutting
Hexagon Socket Head Cap Screw
Hexagonal bolt, fully threaded, SB FITTINGS DIN EN 15048-1
Safety shoe S1
Carrier rods without markers for SNAP marker
Connector, pneumatic
1/4" socket wrench insert metric, long
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Stud with threaded end ≈ 2d
T-piece, with solder connection on all sides EN1254, copper, 5130
