Conical countersink HSS Ruko plain form D 120°
Conical countersink HSS plain form D 120° Ruko
CNTSNKCONE-RUKO-102249-HSS-120GRD-D20,5
Register now and access more than 125,000 products
Due to the CBN deep-ground flutes, the cutting edges are extremely sharp. Burr- and chatter-free countersinking and deburring.
Optimal results at a low cutting speed.
Datasheets(X)
Spot-facer diameter (d1) | 20.5 mm |
Length (l1) | 102 mm |
Surface | Plain |
Shank style | Morse taper |
Last viewed
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
Replacement spray head For spray cans
Hexagon nut, flat profile with fine thread DIN 936, steel, plain
Heavy Duty non-slip floor marking adhesive tape
Hexagonal bolt with thread up to the head
Concrete screw with hexagon head and large disc W-BS/S
Shower pan Linear, flat
Cone grease nipple Angled shape 90° DIN 71412 shape C, zinc-plated steel
Cylindrical grooved pin with chamfer ISO 8740, steel, plain
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with metallic sealing edge, shape B