Conical countersink assortment Ruko conical countersink bit set 90° "short" HSS TiN, 7 pcs
Con. c/snk set HSS TiN bit shaft short 7 pcs. Ruko
CNTSNKCONE-RUKOW102319T-90GRD-D6,3-20,5
Register now and access more than 125,000 products
Ideal for burr- and chatter-free countersinking and deburring of steel, cast iron, non-ferrous and light metals. Optimal results at a low cutting speed.
- 6 conical and countersink deburring bits dia. 6.3 – 8.3 – 10.4 – 12.4 – 16.5 – 20.5 mm
- + 1 universal handle with ¼ inch hexagon socket
Datasheets(X)
Number of pieces in assortment/set | 7 PCS |
Countersink angle | 90 Degree |
Surface | TiN |
Number of cutting edges | 3 |
Last viewed
Grooved taper-pin ISO 8744 steel plain
Safety square chain
Polishing machine PM 200-E
Countersunk washer/washer A1 stainless steel
Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
EPS profile thumbturn cylinder
Long 90° elbow with female thread EN10242 G1, hot-dip galvanised malleable iron
SMART STEP EU+ HSCo twist drill bit DIN 338
Clamp with fastening lugs SL MINI W4
Handle plate TYPE E