Conical countersink assortment Ruko conical countersink set DIN 335 form C 90° HSS plain, 17 pcs.
Con. counters. set DIN 335 HSS plain 17pcs Ruko
CNTSNKCONE-RUKO-102155-90GRD-D4,3-25,0
Register now and access more than 125,000 products
Dia. 4.3 – 5.0 – 6.0 – 6.3 – 7.0 – 8.0 – 8.3 – 10.0 – 10.4 – 11.5 – 12.4 – 15.0 – 16.5 – 19.0 – 20.5 – 23.0 – 25.0 mm
(Dia. 16.5 mm = shank dia. 10.0 mm)
Due to the CBN deep-ground flutes, the cutting edges are extremely sharp. Burr- and chatter-free countersinking and deburring. Optimal results at a low cutting speed.
Datasheets(X)
Number of pieces in assortment/set | 17 PCS |
Standards | DIN 335 |
Countersink angle | 90 Degree |
Surface | Plain |
Number of cutting edges | 3 |
Shank style | Cylindrical |
Last viewed
Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
Stretch X softshell jacket
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain
Round wire snap ring and snap ring groove DIN 9925, A2 stainless steel, for shafts
XZN bit for door wrenches
Filling washer WIT-SHB
Hexagon nut with fine thread DIN 934, steel I8I, zinc-plated yellow chromated (A2C)
CEE extension lead