Conical countersink assortment Ruko conical countersink set DIN 335 form C 90° HSS plain ALU, 5 pcs.
Con. counters. set DIN 335 HSS PL ALU 5pcs Ruko
CNTSNKCONE-RUKO-102154A-90GRD-D6,3-25,0
Register now and access more than 125,000 products
Dia. 6.3 –10.4 – 16.5 – 20.5 – 25.0 mm
Due to the CBN deep-ground flutes, the cutting edges are extremely sharp. Burr- and chatter-free countersinking and deburring. Optimal results at a low cutting speed.
Datasheets(X)
Number of pieces in assortment/set | 5 PCS |
Standards | DIN 335 |
Countersink angle | 90 Degree |
Surface | Plain |
Number of cutting edges | 3 |
Shank style | Cylindrical |
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Hexagon head bolt with full thread for pressure container construction (PED) ISO 4017, steel 25CrMo4, zinc-plated
Countersunk screw with hexalobular head
Seaming pliers, curved 90 degrees
Hexagon nut, inch
Hexagon nut, low profile, with clamping piece (non-metal insert), fine thread DIN 985, A4 stainless steel, plain
Wedge lock washer, W.TEC series, wide shape
EPS profile thumbturn cylinder
T-connector For commercial vehicles
Slam latch