Welcome to Würth Aerospace Solutions For trade customers only

Connection square bar for Insert 3D hinge milling jig

Connection square bar for milling jig Insert 3D
CONSQUARBAR-F.RECESHNGE3D-(ZN)-L2400MM

Art.-no. 0688396021
EAN 4038898581420

Prices for customers after login
Connection square bar for Insert 3D hinge milling jig

Art.-no. 0688396021

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

  • For efficient installation of Insert 3D recessed hinges dia. 20 mm
Notice

If the milling jig is used as a series jig, the second or third milling jig should be positioned such the distance between the "A" markings corresponds to the required hinge spacing.


We recommend making a test cut prior to the first installation.

Specified dimensions not binding. Subject to technical changes!

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions

Steps for installing as series milling jig:


1. Mount the series milling jig. (The length stops can be adjusted separately for DIN R + DIN L doors and are inserted in the door rebate.)


2. Define the hinge location


3. Align the door milling jig with the frame milling jig (take into account upper rebate space on door milling jig of min. 4 mm.)


4. Determine the lip thickness. (To guarantee the stability of the milling jig for a lip thickness of 18 mm, we recommend using the supplied stick-on spacer pieces.)


5. Clamp the series milling jig onto the door leaf (insert in the door rebate)


6. Insert the template in the milling jig and make the cuts (stop ring: 30 mm diameter, milling jig: 20 mm diameter, milling depth: 50 mm)


7. Remove the series milling jig


8. Clean the recesses


9. Insert and secure the hinges


10. Insert the door leaf in the frame and check it works

Material

Aluminium

Surface

Plain

DIN direction

DIN R/L

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information